 | 550C are a true forged carbon steel design, made from a softer alloy of
Carbon Steel called 1035C with lower carbon content for allowing the forging
process to pack the steel tighter and improve grain structure and reduce
internal voids.
| 550C is a true Cavity Back design, which means it is forgiving on
off-center hits and recommended for all levels of players.
| TWGT uses a 5-step forging process which is one more step than most all
other forged irons; the additional step is done to compress the steel
tighter in the head and to help reduce the amount of grinding that is
required to prepare the irons for nickel/chrome electro-plating. This also
ensures more consistency of shape in the set.
| The progressive offset from 3.5mm in the #2 and 3 irons, down to 2.0mm in
the short irons is more like what the pros on the PGA Tour have started to
like, more than a total non-offset design.
| 550C is designed to allow clubmakers to "mix-and-match" with the
550M muscleback forged iron - to choose any number of irons from each set to
make up the full set. Most typical will be to use the #2, 3, 4 from the 550C
with the #5, 6, 7, 8, 9, PW from the 550M.
| 550C has a true "tour grind" shape sole design, which means it
is slighly rounded from the front to back, and also has the leading edge and
trailing edge rounded to prevent the sole from sticking in the turf when it
is used.
| All scorelines, hosel bore and even all the logo/wording on each 550C
forged ironhead are CNC machined and not stamped for greater accuracy and
higher quality.
| Finished in Bright Mirror Double Nickel/Chrome plating with a unique new
"mini-shot" blast surface in the back cavity.
| Available in any set make up or any individual heads #2, 3, 4, 5, 6, 7, 8,
9, PW, AW, SW. |
| Forged Irons that offer
a true custom set make-up. Mix and match 550M's & 550C's anywhere in the
set that you desire.
|
| | | | | | | |
