 | 550M are a true forged carbon steel design, made from a softer alloy of
Carbon Steel called 1035C, lower in Carbon content to allow TWGT's forging
process to pack the steel tighter in the die to improve grain and eliminate
internal voids.
| TWGT uses a 5-step forging process which is one more step than most all
other forged irons; the additional step is done to compress the steel
tighter in the head and to help reduce the amount of grinding that is
required to prepare the irons for nickel/chrome electro-plating. This also
ensures more consistency of shape in the set.
| The progressive offset from 3.5mm in the #2 and 3 irons, down to 2.0mm in
the short irons is more like what the pros on the PGA Tour have indicated a
preference toward.
| 550M is designed to allow clubmakers to "mix-and-match" with the
550C muscleback forged iron - to choose selected ironheads from each set to
make up the full set. Most typical will be to use the #2, 3, 4 from the 550C
with the #5, 6, 7, 8, 9, PW from the 550M.
| 550M has a true "tour grind" shape sole design, which means it
is slighly rounded from the front to back, and also has the leading edge and
trailing edge rounded to prevent the sole from sticking in the turf when it
is used.
| 550M is a true Muscleback design which is preferred more by better ball
strikers.
| Finished in Bright Mirror double nickel/chrome plating - all scorelines,
hosel bore and all logo/wording on each head is CNC machined and NOT stamped
for greater accuracy and higher quality.
| Sold in sets of #5 - PW, (R.H. only) or all head numbers are available individually. |
| Forged Irons that offer a true custom set make-up. Mix and match
550M's & 550C's anywhere in the set that you desire.
|
| | | | | | |
