|
BACK TO GOLF
PUTTER SHAFTS
WEDGES & PUTTERS
PUTTERS
CLF
Series 1
& 2
In yet another industry design 1st,
Tom Wishon has created a completely
unique putter design concept allowing club makers to custom fit the most
over looked key to putting… loft angle.
Interchangeable loft faces (available in 2°, 4° and 6°
lofts) eliminate having to bend the hosel, or shaft to custom fit loft– a
procedure that prevents a putter from sitting flat on its sole & square to
the target.
WEDGES
Wishon
CX Micro Platinum or Satin Chrome Wedges
MEDIUM
SOLE WIDTH DESIGN
Another
innovative TWGT design first to offer maximum spin capability for all golfers
CNC face milling with micro-groove score lines makes the CX-Micro wedges the
ultimate for short game spin control
USGA conforming, CNC
machined face milling to increase surface
roughness between micro-groove score lines
USGA conforming,
micro-groove score lines allows more score line edges to be in contact with the
surface of the ball at impact
Zero bounce heel
design to reduce 'bladed' shots when the face is rolled open
Investment cast from
soft 304 stainless steel to deliver a forged-feel and allow a wide range of
custom loft and lie options
Designed in 52°, 56°
and 60° lofts and available in both brushed satin nickel chrome and platinum
nickel plated finish with glass bead blast highlights
| Club |
Loft |
Lie |
Weight |
Offset |
Sole Angle* |
Toe Height |
Heel Height |
Sole Width T/H |
RH/LH Avail. |
| CX-52° |
52° |
64° |
284g |
1.5mm |
(6) (0)" |
60mm |
40mm |
19.5/16.5 |
RH |
| CX-56° |
56 |
64 |
298 |
2 |
(12) (0) |
61 |
41 |
22/18 |
RH/LH |
| CX-58° |
58 |
64 |
298 |
2 |
(8) (0) |
61 |
41 |
21/17.5 |
RH |
| CX-60° |
60 |
64 |
294 |
1.5 |
(9) (0) |
60.5 |
40.5 |
20/17 |
RH |
|
*Note:
|
First (number) is the
primary sole angle. Second (number) is the zero bounce sole angle on the
heel side.
|
PCF
Micro Tour Satin Chrome & Platinum Nickel Plating Wedges
NARROW
SOLE WIDTH DESIGN 
Features
Traditional, narrow
sole, classic shape/profile stands as the
finest overall shape and set-up behind the ball in a TWGT original wedge design.
Numerous wedge fitting options in 48°/PW, 52°/AW, 56°/SW, 58° and 60°
CNC milled face with Micro-groove scorelines to fully maximize every golfer's
ability to spin the ball. Tests with Trackman launch monitor verify a 1000 rpm
increase in spin rate compared to typical U-groove scorelines.
Zero-bounce grind heel ensures the leading edge remains low to the ground when
the face is rolled open for finesse shots.
Available in satin chrome and
platinum nickel plating finishes, with LH models in the 52° and 56°.
Available in Satin Chrome or Platinum Nickel Finish (platinum
nickel shown)
PCF
Micro Platinum & Satin Chrome Wedges WIDE Sole
Width Design
Unique
2-piece design construction allows super wide sole with traditional head profile
at normal headweight.
Super wide sole designed with very low bounce - the perfect match of sole angle
and width for game improvement.
Ideal wide sole designed for game improvement - perfect for golfers who have
struggled to get the ball out of the sand or hit consistently from tall grass
around the green.
Designed in 55° sand wedge and 60° lob wedge models in RH, and 55° in LH, all
in either satin chrome or platinum nickel finishes.
Unique Wide Sole/Low Bounce Design allows the PCF Micro Wide Sole to be played
effectively from normal to short grass.
Micro-groove scorelines with CNC milled face enhances backspin for all levels of
player.
Available in Satin Chrome or Platinum Nickel Finish (platinum
nickel shown)
ALL WEDGES ARE SHAFTED WITH
|
|
|
Originally
made for PGA Tour players who like a softer feel in their scoring irons,
the Rifle Spinner is a scoring wedge shaft designed for sand, lob and gap
wedges.
|
| 
